Guangzhou Longkai Chemical Co., Ltd.
中文版 | English
TELL
86-20-82028086
Epoxysilane KH-560 【3-(2,3-epoxypropoxy) propyl trimethoxysilane】
Epoxysilane KH-560
Epoxysilane KH-560

【CAS】:2530-83-8

【Chemical Name】:3-(2,3-epoxypropoxy) propyl trimethoxysilane

DETAILS

Product Code:KH-560

Corresponding Brand:Z-6040

Chemical Name:3-(2,3-epoxypropoxy) propyl trimethoxysilane

Synonyms:3-glycidyl ether oxypropyl trimethoxysilane, 2,3-epoxypropyl trimethoxysilane, gamma-(2,3-epoxypropoxy) propyl trimethoxysilane, gamma-(methacryloxy) propyl trimethoxysilane, 3-glycidyl propoxy trimethoxysilane, 3-glycidyl propoxy trimethoxysilane

Molecular Formula:CH2-CHCH2-O(CH23Si(OCH3)3

Structural Formula:

Properties
  Describe This product is a colorless transparent liquid, soluble in a variety of organic solvents, easy hydrolysis, condensation to form polysiloxane, superheat, light, peroxide in the presence of easy polymerization.
  Molecular Weight   236.34   CAS   2530-83-8
  EINECS   219-784-2   Boiling Point   290°C
  Density   1.0700 ± 0.0050 (ρ20)g/cm3   Refractive Index   1.4270 ± 0.0050 (n25D)
Application
Application Area

glass fibre |  An adhesive  |  resin  |  filler  |  Plastic  |  Spin   |  coating

Main Uses

  It is mainly used to improve the surface bonding properties of organic and inorganic materials, such as fiberglass in FRP and silicone fillers in plastics, rubber, paint and coatings. It is also used in adhesives to increase the bonding properties. The resins it adapts to include epoxy, phenolic, melamine, polysulfide polyurethane, polyaniline and so on.

  The adhesion of inorganic fillers, substrates and resins is improved, so that the mechanical strength and electrical properties of the composites are improved, and the retention rate is higher in wet state. As inorganic filler surface treatment agent, it is widely used in ceramics, glass beads, talc powder, wollastonite, silica, quartz, aluminium powder, iron powder.

  It is suitable for epoxy sealant filled with quartz, epoxy concrete repair material or coating filled with sand and epoxy mould material filled with metal. It can also improve the adhesion of two-component epoxy sealant, and improve the adhesion of acrylic latex, sealant, polyurethane and epoxy coating.

Storage

5 kg/barrel, 20 kg/box.
Store in a cool, dry and ventilated place, damp-proof and waterproof, away from fire and heat source.


RELATED PRODUCTS